|
|
Stainless Steel Waterfall & Pond Pumps
High volume, Solids handling pump for residential & commercial
waterfalls and ponds.
Pump Applications:
|
|
|
-- Dewatering Construction sites, mines |
|
-- subways, tunnels, civil engineering |
|
-- Utilities |
|
-- Decorative fountains, waterfalls, and fish ponds |
|
-- Residential, commercial wastewater discharge. |
Pump Specification:
|
|
|
SPEED:
3450RPM (nominal) |
|
SOLIDS
HANDLING: Screen Size |
|
CAPACITIES:
Up to 35GPM, |
|
TOTAL HEADS:
Up to 36 ft. |
|
DISCHARGE:
1-1/4" NPT |
|
AMBIENT TEMP:
104F (40C) Continuous 140F(60C) Intermittent |
|
Max.
Start/Stop times per hour:15 |
|
PUMP CASING:
304 Stainless Steel |
|
MOTOR
HOUSING: 304 Stainless Steel |
|
SEAL PLATE:
Cast Aluminum |
|
IMPELLER:
Semi-open, ABS |
|
SHAFT:
Corrosion resistance stainless steel Keyed at the end |
|
O-RING:
BUNA-N, assures positive sealing against oil leakage.
|
|
HARDWARE:
300 series stainless steel. |
|
MECHANICAL
SEALS: 300 S.S. metal parts, BUNA-N elastomers. Silicon Carbide
VS Ceramic |
|
CABLE:
Water proof 16 ft. Cord (Plug on 115V). |
|
ENTRY:
Pressure grommet for sealing and strain relief. |
|
MOTOR:
Squirrel Cage Induction, Single Phase, 2 Poles, Air filled,
115V/60Hz, 1/6Hp~1/3Hp, Permanent Split Capacitor Type, Built-in
Thermal Protector, with automatic reset. |
|
OPTIONAL:
Piggy back ball float switch.
Only 54.95 |
|
Model |
V. |
Motor Full
Load (Amps) |
Hp |
GPM at height(ft.) |
Shut Off
(ft.) |
Cord Size |
Price |
|
5 |
10 |
15 |
20 |
25 |
30 |
35 |
|
QDX120BS |
115 |
2.0 |
1/6 |
21 |
17 |
12 |
7 |
|
|
|
25 |
16/3 |
159.00 |
|
QDX180BS |
115 |
2.8 |
1/4 |
|
27 |
25 |
20 |
16 |
10 |
2 |
36 |
16/3 |
179.00 |
|
QDX250BS |
115 |
3.5 |
1/3 |
|
35 |
29 |
24 |
18 |
6 |
|
32 |
16/3 |
199.00 |
Pump Applications:
|
|
|
-- Dewatering Construction sites, mines |
|
-- subways, tunnels, civil engineering |
|
-- Utilities |
|
-- Decorative fountains, waterfalls, and fish ponds |
|
-- Residential, commercial wastewater discharge. |
Pump Specification:
|
|
|
SPEED:
3450RPM (nominal) |
|
SOLIDS
HANDLING: Screen Size |
|
CAPACITIES:
Up to 80GPM, |
|
TOTAL HEADS:
Up to 44ft. |
|
DISCHARGE:
1-1/2" NPT |
|
AMBIENT TEMP:
104F (40C) Continuous 140F(60C) Intermittent |
|
Max.
Start/Stop times per hour:15 |
|
PUMP CASING:
304 Stainless Steel |
|
MOTOR
HOUSING: 304 Stainless Steel |
|
SEAL PLATE:
304 S.S |
|
IMPELLER:
Semi-open, 304 S.S |
|
SHAFT:
Corrosion resistance stainless steel Keyed at the end |
|
O-RING:
BUNA-N, assures positive sealing against oil leakage.
|
|
HARDWARE:
300 series stainless steel. |
|
MECHANICAL
SEALS: 300 S.S. metal parts, BUNA-N elastomers. Silicon Carbide
VS Ceramic |
|
CABLE:
Water proof 16 ft. Cord (Plug on 115V). |
|
ENTRY:
Pressure grommet for sealing and strain relief. |
|
MOTOR:
Squirrel Cage Induction, Single Phase, 2 Poles, Air filled,
115V/60Hz, 1/2Hp~1Hp, Permanent Split Capacitor Type, Built-in
Thermal Protector, with automatic reset. |
|
OPTIONAL:
Piggy back ball float switch.
Only 54.95 |
|
Model |
V. |
Motor Full
Load (Amps) |
Hp |
GPM at height (ft.) |
Shut Off
(ft.) |
Cord Size |
Price |
|
15 |
20 |
25 |
30 |
35 |
40 |
|
QDX370B |
115 |
8 |
1/2 |
30 |
24 |
17 |
12 |
8 |
|
35 |
16/3 |
209.00 |
|
QDX550B |
115 |
9 |
3/4 |
65 |
59 |
44 |
28 |
11 |
|
38 |
16/3 |
239.00 |
|
QDX750B |
115 |
10 |
1 |
80 |
70 |
59 |
45 |
30 |
10 |
44 |
14/3 |
259.00 |
|
QDX1100B |
115 |
|
1 1/2 |
119 |
97 |
66 |
49 |
31 |
15 |
40 |
14/3 |
309.00 |
WQB Stainless Steel Effluent Pump
|
Pump Applications:
---Dewatering Construction sites, mines
---Subways, tunnels, civil engineering
---Utilities
---Decorative fountains, waterfalls, and fish
ponds
---Residential, commercial sewage or wastewater
discharge.
Specifications for effluent pumps:
Power Cable:
Water proof 30 ft. cord, pressure grommet for
sealing and strain relief.
O-ring: Buna-N, assures positive sealing against
oil leakage.
Bearing: Upper and lower ball bearing
construction to carry all radial and thrust
loads.
Pump
Casing (Motor Housing): Corrosion resistant AISI
304 SS designed for long lasting performance.
Motor: 2 poles, squirrel cage induction, air
filled single phase, permanent split capacitor
type, built-in thermal protector, with automatic
reset.
Shaft: Corrosion resistance stainless steel.
Impeller: AISI type 304 stainless steel.
Volute Casing: Corrosion resistant AISI 304 SS.
Designed for easy installation.
Dual Mechanical Seals: stainless steel metal
parts, Buna-N elastomers.
Upper Seal: Carbon VS Ceramic
Lower Seal: Silicon Carbide VS Silicon Carbide
OPTIONAL:
Piggy back
ball float switch
/ 115v.
Only 59.95
|
|
Model |
Head FT |
Capacity@5ft |
Volt. |
Power |
Solids |
Weight |
Price |
|
WQ-0.55B |
Max:26 |
Max:66GPM |
115V,60HZ |
3/4HP |
1.5" |
29 lb. |
259.00 |
|
WQ-0.75B |
Max:31 |
Max:80GPM |
115V,60HZ |
1HP |
1.5" |
30 lb. |
279.00 |
|
WQ-1.1B |
Max:41 |
Max:105GPM |
115V,60HZ |
1.5HP |
1.5" |
32 lb. |
299.00 |
WQBS Stainless Steel Effluent Pump
|
Model |
Head FT |
Capacity |
Vol./Frequency |
Power |
Solids
Handling |
Weight LBS |
|
WQ-0.75BS |
Max:36 |
Max:66GPM |
115V,60HZ |
1HP |
1.5" |
36 |
|
WQ1.1BS |
Max:40 |
Max:97GPM |
115V,60HZ |
1.5HP |
1.5" |
39 |
|
